• Sat. Nov 21st, 2026

    Mouse Polling Rate Test – Check Mouse Hz Online

    GamingImba Tools

    Mouse Polling Rate Test

    Estimate how frequently your browser receives mouse movement events during a five-second test.

    Click Start Test, then move your mouse continuously in circles inside the area.
    READY TO TEST5.0s
    LIVE—Hz

    Keep the pointer inside this area and move it continuously.

    Live frequencyWaiting to start
    Results

    Run the test to see your results

    Average Polling Rate—Hz
    Average Report Interval—ms between active events
    Peak Observed Rate—Hz
    Minimum Observed Rate—Hz
    Measurement Confidence—Waiting for data

    Active-rate statistics use fixed 250 ms windows. Windows without enough continuous movement data and idle gaps longer than 50 ms are excluded.

    What does this polling rate test measure?

    This tool estimates the frequency of mouse movement events observed by your browser. It prefers pointerrawupdate when the browser supports it and otherwise uses pointermove. Where appropriate, coalesced event timestamps are processed without counting the parent event twice.

    The result is not guaranteed to equal the mouse’s exact USB hardware polling rate. Browsers may combine, throttle or reduce the timestamp precision of movement events. Operating-system scheduling, browser load and display activity can also affect the observed frequency.

    Polling rate and interval

    A polling rate of 125 Hz corresponds to a theoretical report interval of 8 ms, 500 Hz to 2 ms, 1000 Hz to 1 ms, 2000 Hz to 0.5 ms, 4000 Hz to 0.25 ms and 8000 Hz to 0.125 ms. Higher polling rates create more frequent reports, but polling rate alone does not represent complete mouse input latency.

    Check how frequently your mouse movement is reported to your browser with the free GamingImba Mouse Polling Rate Test. Also called a Mouse Hz Test, this tool estimates the rate of movement samples observed during a short test. No download or account is required.

    Important: Browser-observed event frequency is not a direct measurement of your mouse’s USB or wireless hardware polling rate. Browsers can group, throttle, or coalesce movement events, especially at high rates. Treat the results as an estimate rather than proof of your mouse’s specifications.

    How to Test Your Mouse Polling Rate

    1. Use a physical mouse on a desktop or laptop, ideally on a surface with enough room to move.
    2. Click Start Test in the tool above.
    3. Move the mouse continuously in circles or smooth back-and-forth motions inside the testing area for approximately five seconds.
    4. Keep the cursor moving until the test finishes and the results appear.
    5. Repeat the test a few times if the readings seem inconsistent.

    You do not need to click repeatedly during the measurement. Avoid lifting the mouse or leaving it stationary for long periods, since movement pauses reduce the available data. The tool reports the movement information the browser actually exposes.

    What Is Mouse Polling Rate?

    Polling rate is the frequency at which a mouse reports movement and button information to its host, usually expressed in hertz (Hz). For example, 1000 Hz corresponds to a nominal interval of one millisecond between reports. That interval is not the same as the full time taken for a click or movement to appear in a game.

    Polling rateNominal report interval
    125 Hz8 ms
    250 Hz4 ms
    500 Hz2 ms
    1000 Hz1 ms
    2000 Hz0.5 ms
    4000 Hz0.25 ms
    8000 Hz0.125 ms

    These intervals are mathematical values based on the nominal rate, not guaranteed real-world response times. Hardware settings, firmware, system performance, and connected software all affect the observed behavior.

    Understanding Your Mouse Hz Test Results

    Average Observed Rate

    The average summarizes the frequency of movement samples seen during the measurement window. Repeating the test while moving your mouse consistently provides a more useful comparison than relying on a single result.

    Minimum and Peak Rate

    Low and high readings indicate variation within the measurement period. Short windows may be affected by cursor movement speed, idle periods, browser scheduling, and timestamp resolution. They should not automatically be treated as the minimum or maximum hardware polling capability.

    Measurement Confidence

    If the tool reports limited or unsupported data, your browser may not expose enough high-frequency movement information to make a meaningful estimate. A mouse set to 4000 or 8000 Hz can appear slower in a browser-based test even when its actual hardware setting is correct.

    Is a Higher Mouse Polling Rate Better for Gaming?

    A higher polling rate reduces the nominal time between reports and may help input updates arrive more frequently. But the practical difference depends on the mouse, game, computer, monitor, and overall input pipeline. Going from 125 Hz to 1000 Hz changes the nominal interval from 8 ms to 1 ms, whereas going from 4000 Hz to 8000 Hz changes it by just 0.125 ms.

    Higher rates can also increase processing overhead or power use on some devices. For many players, consistent tracking, comfortable sensitivity, stable frame times, and a reliable connection matter more than maximizing the advertised Hz number.

    Why Is My Mouse Polling Rate Lower Than Expected?

    First, remember that online results may be limited by the browser. Browsers can combine multiple raw movement updates into fewer events, and some platforms do not expose high-frequency raw updates at all. Slow or interrupted cursor movement can also produce too few meaningful samples.

    If readings are unexpectedly low, try keeping the test tab in focus, moving the mouse continuously, closing demanding background apps, testing another supported browser, and confirming your polling rate in the mouse manufacturer’s software. For a definitive hardware-level check, use appropriate dedicated testing software or equipment rather than an in-browser estimate.

    Mouse Polling Rate vs. DPI vs. Click Latency

    These settings describe different aspects of mouse behavior. Polling rate is how often reports are sent; DPI influences the distance the cursor moves for a given physical movement; and click latency describes the delay between a button action and a recorded response. A higher polling rate does not automatically mean a higher DPI or lower total click latency.

    For another browser-side timing check, try our Mouse Latency Test. To compare sensitivity settings in CS2 and Valorant, use the eDPI Calculator. Neither tool should be confused with a laboratory-grade polling-rate benchmark.

    More Free GamingImba Tests

    Explore our Keyboard Latency Test for browser-observed keyboard event timing, or try the Reaction Time Test to measure how quickly you respond to an on-screen signal. You can find all our free utilities in the GamingImba Tools hub.